Carpet Extraction Cleaner – I11

Description

MAJESTIC CARPET EXTRACTION CLEANER

DESCRIPTION
A specially formulated high performance extraction that meets the highest standards in carpet extraction maintenance. Approximately 80% of all soils and greasy substances are caused by foot traffic and over half are of a greasy nature. Safe on all synthetic carpet fibers. Does not contain any optical brighteners. This product is an extraction cleaner that cleans the carpet fibers more thoroughly than any product on the market today. This product is most effective on carpets that have been previously treated with a mill-applied fluorochemical stain-resistant treatment.

DIRECTIONS
Vacuum carpet thoroughly. Test carpet for colorfastness in an inconspicuous area before any method of cleaning.

Dilute product according to guidelines below:
LIGHT DUTY CLEANING: Use 2 oz. per each gallon of water.
MEDIUM DUTY CLEANING: Use 3 oz. per each gallon of water.
HEAVY DUTY CLEANING: Use 4 oz. per each gallon of water.

FOR USE AS A PRE-SPRAY:
Spray diluted product onto the carpet and allow product to dwell 3-5 minutes, then proceed to rinse using an extraction cleaner with a rinse and neutralizer as per directions on label.

FOR USE IN AN EXTRACTION CLEANER:
Dilute product in holding tank. Release the solution out and make only one pass with the extraction machine. Be certain to overlap 1-2 inches. The carpet should be dry within 4 hours. Use fan if necessary.

FOR USE IN A TRUCK MOUNT UNIT:
Dilute 4 ounces per 5 gallons of water in holding tank and meter at 3 gallons per hour. Extract in normal fashion, followed by using a rinse and neutralizer as per label instructions.

To control excessive suds during extraction caused by prior cleanings, use a defoamer in the recovery tank of the extraction machine.
SPECIFICATIONS:

AVAILABILITY: