Ultima – ULT


pdf_iconlargeEnglish Spec / Data Sheet
pdf_iconlargeEnglish SDS Sheet
pdf_iconlargeIngredient Disclosure

108878: 4 x 1 Gallon
108884: 2 x 2.5 Gallon
108870: 5 Gallon pail
108889: 55 Gallon drum
Categories: , , SKU: ult


High Solids Extended Wear Finish

• Extended wear
• High Solids
• Low maintenance

• Longer floor finish life cycle
• Requires less coats
• Saves time and labor

• Classrooms
• Healthcare facilities
• Office buildings


A high solids floor finish that provides diamond like clarity and brilliant gloss, along with extended wear properties never before available in one product. Will respond beautifully to conventional, high, or ultra-high speed floor equipment after weeks of wear and traffic when used with a spray buff or mop-on restorer. Saves enormous amounts of time and labor by requiring less maintenance.

PREPARATION: If stripping is necessary, use a high quality stripper and follow the directions accordingly. Follow with a thorough rinsing and allow floor to dry completely. If stripping is not necessary; sweep up loose dirt and dust. Clean with a quality cleaner to remove dirt and oils. Follow with a thorough rinsing and allow floor to dry completely.

FINISHING: Spread a liberal coat of finish evenly across the floor with a clean mop or applicator. Allow each coat to dry at least 30 minutes before applying the next coat. Four coats are ideal initially, depending on the condition of the floor and desired gloss.

MAINTENANCE: The floor may be maintained using a quality floor cleaner and damp mopping regularly. Spray buffing or mop-on restoring may also be done after sweeping up loose dirt and dust. Follow directions for each product accordingly.



Color White
Odor Fragrance free
pH 8.0 – 9.0
Non-Volatile Solids 24%
Coverage 1800 – 2200 ft2 / gal.
Recommended Coats 4
Dry / Recoat Time 30 minutes min.
Maintenance Schedule Monthly burnish or spray buff
Slip Resistance 0.5 min. by ASTM-D2047
Storage/Stability 2 years
Weight per Gallon 8.60 lbs./gal.
Freeze/Thaw Stability 3 cycles

Additional information


UL Certified

Maintenance Schedule

Non Volatile Solids

Recommended Coats