Extended Wear Finish
A floor finish that provides diamond like clarity and brilliant gloss, along with extended wear properties never before available in one product. Will respond beautifully to conventional, high, or ultra-high speed floor equipment after weeks of wear and traffic when used with a spray buff or mop-on restorer. Saves enormous amounts of time and labor by requiring less maintenance.
PREPARATION: If stripping is necessary, use a high quality stripper and follow the directions accordingly. Follow with a thorough rinsing and allow floor to dry completely.
If stripping is not necessary; sweep up loose dirt and dust. Clean with a quality cleaner to remove dirt and oils. Follow with a thorough rinsing and allow floor to dry completely.
FINISHING: Spread a liberal coat of finish evenly across the floor with a clean mop or applicator. Allow each coat to dry at least 30 minutes before applying the next coat. Five coats are ideal initially, depending on the condition of the floor and desired gloss.
MAINTENANCE: The floor may be maintained using a quality floor cleaner and damp mopping regularly. Spray buffing or mop-on restoring may also be done after sweeping up loose dirt and dust. Follow directions for each product accordingly.
This product meets the maximum content requirements for Volatile Organic Compounds (VOCs) as established by state and Federal regulations.
|pH||8.0 – 9.0|
|Coverage||1800 – 2200 ft2 / gal.|
|Dry / Recoat Time||30 minutes min.|
|Maintenance Schedule||Monthly burnish or spray buff|
|Slip Resistance||0.5 min. by ASTM-D2047|
|Weight per Gallon||8.51 lbs./gal.|
|109067…………………..4 x 1 Gallon
109072………………..2 x 2.5 Gallon
109059………………….5 Gallon pail
|109077………………55 Gallon drum|